Aquasweep Oscillator w/ 50ft Cord
Manufacturer: Scott Aerator
Typically Ships: 3-6 Business Days
Model: 165751
Series: Aquasweep
THE AQUASWEEP™ OSCILLATOR 360 WITH 50FT CORD
Fully Programmable Oscillator 360 - The Oscillator 360 can be added to a new or an already installed Aquasweep and allows you to program any radius you want, up to a full circle. Then plug it in and forget about it. The Aquasweep will repeat the program until you tell it to stop. We pre-program the Oscillator to rotate 360° in 20° increments every 20 minutes.
NOTE: The Oscillator 360 can be added to "in-place" Aquasweep (not floating) and De-Icer models. This unit is made in the USA and comes with a two-year warranty.
DO I NEED A PERMIT?
You will not need a permit. The Aquasweep is legal for use and purchase in all 50 states and Canada. Some states have regulations that make it unlawful to hydraulically excavate and forcefully uproot muck and vegetation. Setting the pump too close to the bottom of the body of water may have an adverse impact on the shoreline and aquatic life, which may be illegal in some jurisdictions including Minnesota. You should check with your local ordinances regarding any limitations on use.
IMPORTANT INFORMATION
- ALWAYS USE A GFCI OUTLET
- ALWAYS DISCONNECT THE POWER WHEN SWIMMERS ARE PRESENT
- EXTENSION CORDS SHOULD NOT BE USED
- DO NOT ADJUST WHILE IN OPERATION - Adjusting the position of the AquaSweep while in operation will cause the dock plate thumb screws to strip, resulting in permanent damage to the dock plate. Always disconnect power before adjusting the AquaSweep.
"
| Manufacturer: | Scott Aerator |
| SKU: | 165750 |
| Shipping | |
| Typically Ships: | 3-6 Business Days |
| Shipping Method: | UPS/FedEx |
| General | |
| Model: | 165751 |
| Accessory Type: | Oscillator |
| Series: | Aquasweep |
| Product Information | |
| Power Requirement: | AC 110V |
1657 12th Street - Martin, MI 49070
Phone: 866-942-6349
Fax: 866-942-6349
E-Mail: info@boatliftanddock.com
