Lift Tech Marine Generation 2 AC 110v LT-ACM100 Boat Lift Motor
Tired of cranking your lift? The Lift Tech Marine model ACM-G2 key switch operated 110V powered direct drive boat lift motor is a great solution to that problem. Easy and quick to install, Lift Tech Marine motor units available in AC and DC power options are packed with design features not found with competitors.
Designed to fit a majority of manual operation freestanding lift manufacturers, this unit allows you to eliminate the hassle of turning that old round turn wheel. Once the Lift Tech motor is installed, it allows you to operate your boat hoist with the turn of a key or by the use of an optional corded push button pendant.
Equipped with Soft Start and Power Indicator LED
Backwind and Max Lift Amp Draw Sensor Protection
Runs on 110 volt AC (must use GFI outlet) with an average 6 - 11 amp draw
Designed and built to handle the elements, motor cover not required.
Heavy duty multi tooth spline for a stronger connection to winch
Works on freestanding mechanical lifts up to 7000 lb. capacity
Easy and quick installation
RPM 74 to 76
Optional Push Button Pendant can be added at any time to key switch models
Backup Bit for manual operation of the unit in the event of a power outage or system malfunction
2 Year Warranty against manufacture defects on all Lift Tech Marine motors.
Lift Tech Marine Motor Units offered by BoatLiftandDock.com are of the most recent model revision. Featuring the most up-to-date safety and design features including soft start, and backwind/overwind amp limit sensors of which are not found on other aftermarket lift motor options.
ACM-G2 Power drive unit
Choice of installation mounting hardware
AC 110V Units - NOTE: water and electricity pose a potentially dangerous situation. It is highly recommended that a qualified electrician perform the installation of the power line equipped with a Ground Fault Circuit Interrupter (GFCI).
Installation Hardware Kits- Lift Tech offers a variety of hardware installation kits specifically designed for certain boat lift manufacturers. Hardware kits allow for the motor unit to attached to an existing mechanical reduction winch assembly. Lift Tech direct drive motors fit a majority of both new and old freestanding hoist manufacturers. During checkout please specify the brand of lift or winch model the motor will be installed on.