The winch tube assembly fits aluminum 2600 lb through 4000 lb capacity mechanical style ShoreStation brand boat lifts. This item includes the complete winch/lift tube assembly that includes consists of (5) sheaves, (2) cables, pulley spacers, sheave bushings and snatch block.
The winch tube can be difficult to rebuild. Save yourself hours of rebuilding and change them all together with this assembly.
Included in this assembly:
Lift Cable (includes 2 standard nuts)
5 Ball Bearing Sheaves
10 Sheave Spacers
2 End Sheave Bushings
1 Solid Snatch Block Bushing
2 End Caps for Snatch Block
You can choose between either Stainless Steel or Galvanized Steel cables. This is an aftermarket assembly that fits the Shore Station 2600 to 4000 lb capacity lifts.
This assembly does not include the attaching fasteners to mount the winch tube in place. You may be able to reuse the fasteners from your current winch tube, but many times these can break or mar up while removing. Here is what you need to mount this tube onto your lift:
4 - 3/8" X 3 3/4" GR5 Bolts
4 - 3/8-16 Hex Nuts
8 - 3/8 Flat Washers
The winch tube comes standard with one 5/8" nut on each threaded end of the lift cable. Shore Station uses two of these nuts along with a 5/8" washer on each threaded end on their new lifts.
This winch tube assembly will fit the following ShoreStation lift models: