HYDROFEND REPLACEMENT SHORESTATION 13' X 62" CANOPY COVER
This aftermarket replacement cover is custom designed to specifically fit existing 13' X 62" Shore Station boat lift canopy frames. Each comes complete with canopy frame cover, attaching hardware and storage bag.
Hydrofend™ Coated fabric is made in U.S.A and combines strength, beauty, and water repellency in this lightweight and durable construction. Hydrofend outperforms uncoated fabrics with up to six times greater water resistance. Forged from a durable polyester monofilament yarn with great tear and tensile strength it is well suited for marine applications. With a propretary solvent coating that creates an armor to fend off surface abrasion and to prevent fraying for the tough textile while providing defense against moisture. It offers a very lightweight construction that is both abrasion resistant and breathable. The lightweight, yet durable and long lasting 8oz per yard material makes Hydrofend easy to install and remove at a mere 1/3 to 1/2 of the weight of most common vinyl materials. The attractive matte, woven appearance Hydrofend canopies are offered in 10 color options engineered to maintain their vibrancy season after season due to the solution-dyed fiber construction.
Includes 8 oz Hydrofend solution-dyed and coated cover with frame attachment hardware kit
Excellent Water Repellency
High Tear and Tensile Strength
Quicklash reinforced lacing canopy attachment system eliminates grommets, 25% stronger than traditional grommet system
Quicklash webbing features UV and Mildew resistance for longer-lasting durability and strength
Hot air rotary heat sealed and welded 1" overlapped seams on top panels and 1/2" on canopy ends
Dabond twisted and bonded continuous filament polyester threading with high UV and water resistance
Includes 5-year limited manufacturer's warranty
HYDROFEND AVAILABLE COLORS
Hydrofend canopy covers are available in 10 colors. Below are color samples of the available colors: Meteor Gray, Desert Beige, Admiral Navy, Bronze Taupe, Iron Grey, Deep Maroon, Bold Black, Green, Lakeshore Blue and Red
QUICKLASH CANOPY ATTACHMENT SYSTEM
The Quicklash canopy attachment system provides a user friendly and easy to install design with increased strength and durability over traditional attachment systems. Sewn into the interior of the cover, Quicklash is a fabric strip with reinforced lacing holes to eliminate the need of grommets to secure the canopy. The Quicklash webbing is reinforced with Armor Bar, a high-tenacity polyester yarn which provides increased tear resistance and strength.
The 2-1/8" wide Quicklash webbing allows for quick, custom installation with 1" lacing holes spaced every 3". The canopy cover is secured utilizing the Quicklash webbing and supplied bungees. The 1/4" stretchable, nylon covered rubber bungees connect to any of the 1" lacing holes and then secured to each specified attachment point on the existing canopy frame. Once all bungees have been installed even tension is created around the perimeter of the canopy frame keeping the cover secure and in place on the frame.
SHORESTATION CANOPY FRAME MEASURING ASSISTANCE
Below we have provided an image that illustrates how to measure your canopy frame in order to determine the proper size cover. ShoreStation aluminum canopy frames will have 4" round aluminum side frame tubes that extend from front to back of the frame. Inserted into the ends of the side frame tube is a bracket that secures two canopy bows to create the canopy ends. The frame will have a rounded peak top created by rounded canopy bows that are connected on each end to the 4" round side frame tube. When measuring the length, please note that you must measure the length of the 4" canopy frame side tube and then add two feet to that measurement. The length of the side tube plus two feet equals the proper canopy length that you will require.
Length Measurement: Length of 4" round aluminum side tube Plus 2 feet
Width Measurement: Inside width of lower canopy rail on a centerline from left to right
Note: Each canopy cover is custom built to order, it is important the correct size is ordered. Returned canopies due to incorrect size or make ordered are subject to restocking fees and in some cases may not be returnable. If replacing an existing cover, check for a canopy tag for size information or contact the manufacturer. If you have any fit related questions after reviewing measuring instructions, please contact us.