ShoreStation Canopy Post Bundles for Revolution Canopy Frames – Model Compatibility Guide

Use this guide to quickly match the correct ShoreStation Revolution canopy post bundle to your specific ShoreStation boat lift model. Selecting the proper canopy legs is critical for correct canopy height, clearance, and long-term structural performance.

This chart covers standard canopy legs, short legs for Deep Water (DW) lifts, and extended / ski tower canopy legs for manual, EDS, and hydraulic ShoreStation lift models. All the leg options listed below are designed for use with ShoreStation Revolution canopy frames. 

Match Canopy Post Bundles to ShoreStation Boat Lift Models

Understanding Canopy Leg Options

Standard Canopy Legs (Most Common)

Standard canopy legs—most commonly identified by “72” in the model number—are approximately 72 inches long and are suitable for most ShoreStation installations.

On Manual and EDS lift models, standard leg kits usually include three full-length legs and one shorter leg designed specifically for the winch column.

Extended / Ski Tower Canopy Legs

Ski tower canopy legs are extended-length versions of standard legs and are required when additional canopy height is needed. These are commonly used when:

• Typically the lift is installed in water depths greater than approximately 4 feet
• The boat has a wakeboard tower, ski tower, or center-console T-top

Short Canopy Legs for Deep Water (DW) Lifts

Short canopy legs are most often used with ShoreStation Deep Water lift models. These lifts use longer lift extension legs, and in shallow-water installations (approximately 5 feet deep or less), standard or ski tower canopy legs may interfere with canopy height adjustment.

Because both the lift extension legs and canopy legs are installed into the same corner columns, short canopy legs provide the correct geometry to allow proper canopy positioning without component interference.

General Canopy Leg Length Reference

The number included in each canopy leg model generally corresponds to the approximate length (in inches) of the legs included in the kit. This provides a quick reference when comparing standard, short, and extended canopy leg options.

• Models with “30” in the bundle model include legs that are approximately 30 inches long
• Models with “32” in the bundle model include legs that are approximately 32 inches long
• Models with “72” in the bundle model include legs that are approximately 72 inches long
• Models with “90” in the bundle model include legs that are approximately 90 inches long
• Models with “108” in the bundle model include legs that are approximately 108 inches long

For manual operation and EDS lift models, canopy leg kits typically include three full-length legs and one shorter leg designed specifically for the winch column. For hydraulic lift models (HS, HY, and HSDW), all four canopy legs are typically the same length, as these models do not use a winch column.

If you are unsure which canopy post bundle is correct for your ShoreStation lift, water depth, or boat configuration, please contact us before ordering so we can help ensure proper fit.