Elite 3/4 HP Stainless Steel 56C Frame Direct Drive Boat Lift Motor – Wired Kit
The Elite 3/4 HP Stainless Steel Direct Drive Boat Lift Motor is a corrosion-resistant, wired motor package designed specifically for direct-drive boat lift systems. Operating at 1725 RPM with a maximum recommended runtime of 15 minutes, this motor mounts directly to compatible gearboxes using a C-Face flange, eliminating the need for belts, pulleys, or flat-plate mounting.
Motor Features
- 3/4 HP electric motor with stainless steel housing for superior corrosion resistance
- Aluminum end plates with marine-grade gasketed capacitor housing to help seal out water and debris
- Totally Enclosed Non-Ventilated (TENV) design protects internal components from dirt, moisture, and insects
- 56C C-Face mounting for direct attachment to gearboxes
- Single-phase operation
- Dual-voltage capable (115V / 230V)
- 5/8" output shaft diameter
- UL Listed and CSA Approved
Included Components
This wired motor kit includes:
- Momentary/spring-loadedBoat lift control switch
- Pre-wired GFCI wiring harness with 14/5 SJTW control cable
- In-line GFCI located approximately 4.5" from the plug
The plug type and GFCI configuration supplied with the wiring harness correspond to the selected motor voltage.
Compatibility & Applications
This motor is designed to mount directly to standard C-Face and C56 flange gearboxes, including A-Drive and E-Drive systems. It is compatible with direct-drive boat lifts from manufacturers such as Boat Hoist USA (BH-USA), Golden Lift, AMS Hefty Hoist, Tide Tamer, Deco Lifts, Hi-Tide Lifts, Neptune Lifts, and Hurricane Boat Lifts.
The motor includes detailed wiring instructions and color-coded T-leads and is compatible with Elite, Bremas, and Salzer drum switches. It also integrates seamlessly with GEM, Galaxy, TEC, and Elite boat lift remote control systems. Performance is equivalent to Leeson boat hoist motor part number 6439191252.
Important: This motor is not compatible with flat-plate, belt-driven hoists.
Electrical Specifications
- Horsepower: 3/4 HP
- Speed: 1725 RPM
- Voltage: 115V or 230V
- Running Amperage: 11.2A @ 115V / 5.6A @ 230V
- Service Factor Amps (SFA): 12.4A @ 115V / 6.2A @ 230V
- Frequency: 60 Hz
- Frame Size: 56C
- Mounting Type: C-Face (Type C)
- Service Factor: 1.15
- Insulation Class: F
- Duty Rating: Maximum 15 minutes
- Maximum Ambient Temperature: 40°C
- Enclosure: TENV (Totally Enclosed Non-Ventilated)
- UL / C-UL-US Recognized
Safety
Warning: All wiring or rewiring of this motor should be performed by a licensed electrician.
What Is a TENV Motor?
A Totally Enclosed Non-Ventilated (TENV) motor is designed to prevent dust, moisture, and debris from entering the motor housing. Because it does not rely on external airflow for cooling, TENV motors are well-suited for marine and outdoor environments where exposure to the elements is common.
