Boat Lifts, Docks, Repairs Parts and Accessories!
All Canopy Covers
SHIP FREE

BLD-V45120LT Power Drive Boat Lift

Manufacturer: Private Label

Product MPN: BLD-V45120-LT

Load Capacity: 4,500

Model: BLD-V45120LT

Item Type: Lift - Freestanding

Inside Opening: 120

Motor Model Selector
Bunk Support Hardware Selector
QTY:
Limited Time Special : $4,999.00
OVERVIEW
BoatLiftandDock Exclusive  BLD-V45120LT vertical motorized boat lift features a integrated direct drive winch motor system designed by Lift Tech Marine. With a time tested, top quality frame structure and winch drive system this boat lift provides great performance and dependability at a great price compared to leading brands. Available with either 110v AC or 12/24v DC power configurations, either winch unit is rated up to 5,000lbs in load capacity and offers a 5 year winch warranty.

The BLD-V45120LT is well suited for most watercraft''s with a loaded weight between 2,900lbs - 4,400lbs. With a 120" inside opening it can accommodate wider watercraft''s with beam measurements up to 9'' comfortably. This unit is available for single hull, pontoon and tritoon configurations.

KEY FEATURES
  •     4500 lb. Max Lifting Capacity
  •     120" Opening Between Vertical Columns
  •     64" Lift Travel Height
  •     Five Boat Support Configurations Available
  •     Integrated Lift Tech 5000lb Power Winch Assembly
  •     98% Aluminum Frame
  •     16" x 12" Foot Pad with Tapered Edges
  •     42" or 48" Aluminum Wheel
  •     54" Telescoping Legs
  •     2 Year Mechanical, 5 Year Winch/Motor Assembly, 15 Year Structural Limited Warranty
  •     Built in the USA

This lift has been designed to be used in low and fluctuating water levels. The 64" lift height gives you a lot of cradle travel to work with and keeps you from having to move the lift to shallow or deeper water.

The 54" telescoping legs get you installed up to a 7 foot water depth. We can also provide longer legs and a bracing kit to get you in up to 10'' of water.

The large tapered pads or feet on this unit allow it to be moved across many different surfaces and lake bottoms without snagging or digging in. This is very helpful for seasonal installation and removal.

ABOUT HULL BUNKS

The BLD-V45120LT offers 5 options for bunk configurations. These options refer to the hardware that supports the watercraft on the lift cradle. This unit is offered with your choice boat support hardware for Single Hull, Deep V Hull / Skeg Hull, Pontoon and Tritoon applications.

  1. Standard Hull Bunks are for standard hull watercraft that do not require additional clearance over the lift cradle. These bunks provide ample clearance for shallow V hulls, flat bottom, and round bottom boats.

  2. Ski Hull Bunks are for those that require extra clearance over the cradle frame. These are commonly used with boats that have a deep V, or multi-hull design. Ski Hull Bunks are also suggested for boat that have tracking skegs (look like upside down dorsal fins) mounted on the at the bottom of the hull. Skegs are mainly used on ski and wake board boats for tracking.

  3. Dual Bunk Pontoon configurations are designed for pontoon boats and are made up of two sets of standard hull bunks configured so that each toon is supported independently.

  4. The Pontoon Rack is also used for pontoon boats and uses aluminum hardware and 2x10x14 lumber to pick up the pontoon from beneath the deck of the boat. Lumber does not ship with this unit and must be provided by customer.

  5. Tritoon "Triple Bunk" configurations is designed to support each three toons found on Tritoons. Tritoon configurations include two sets of 12'' bunks for the the outer toons and support the center toon with a single set of 10'' bunks.

ADDITIONAL INFORMATION

This product ships out common carrier LTL freight service. Unit can be delivered to either a Residential or Commercial address.


© 2017 BoatLiftandDock.com
BLD Aluminum Vertical Freestanding Lift. 4500lb Capacity, 120" Inside Opening with your choice of winch drive system and boat support hardware.
SPECIFICATIONS
Manufacturer: Private Label
SKU: BLD-V45120LT
Base Group
Product MPN: BLD-V45120-LT
General
Load Capacity: 4,500
Model: BLD-V45120LT
Item Type: Lift - Freestanding
Assembly Required: Yes
Frame Specs
Inside Opening: 120
Lift Cradle Travel: 64
Adjustable Leg Size: 54
Hull Bunk Type: Aluminum/Vinyl
Hull Bunk Length: 10
Cradle Style: I-Beam
Frame Material: Aluminum
Fasteners: Stainless/Brass Combo
Foot Pad Size: 12x16
Cable Specs
Cable Diameter: 5/16
Cable Material: Galvanized Steel
Winch Specs
Motor Type: Direct Drive
Power Requirement: DC 24V
Application Suggestions
MinWaterDepth: Draft + 7"
MaxWaterDepth: 7
Watercraft Weight (Wet): 2,900 - 3,400, 3,400 - 3,900, 3,900 - 4,400
Lift Design
Operation: Electric
Watercraft Style: Pontoon, Single Hull, Tritoon
Lift Design: Electric, Freestanding, Vertical
Return Policy
Restocking Fee: Yes
Shipping Information
Typically Ships: 7-14 Business Days
Shipping Method: LTL Freight
Warranty Information
Warranty: 2 Year Mechanical and 15 Year Structural
REVIEWS
FAQ
You May Also Like These Items

1657 12th Street - Martin, MI 49070

Phone: 866-942-6349

Fax: 866-942-6349

E-Mail: info@boatliftanddock.com

Loading...