BLD-V45120LT 4500 LB CAPACITY POWER DRIVE BOAT LIFT
BoatLiftandDock Exclusive BLD-V45120LT vertical motorized boat lift features an integrated direct drive winch motor system designed by Lift Tech Marine. With a time tested, top quality frame structure and winch drive system this boat lift provides great performance and dependability at a great price compared to leading brands. Available with either 110v AC or 12/24v DC power configurations, either winch unit is rated up to 5,000lbs in load capacity and offers a 5-year winch warranty.
The BLD-V45120LT is well suited for most watercraft's with a loaded weight between 2,900lbs - 4,400lbs. With a 120" inside opening it can accommodate wider watercraft's with beam measurements up to 9'' comfortably. This unit is available for single hull, pontoon, and tritoon configurations.
4500 lb. Max Lifting Capacity
120" Opening Between Vertical Columns
64" Lift Travel Height
Five Boat Support Configurations Available
Integrated Lift Tech 5000lb Power Winch Assembly
98% Aluminum Frame
16" x 12" Foot Pad with Tapered Edges
42" or 48" Aluminum Wheel
54" Telescoping Legs
2 Year Mechanical, 5 Year Winch/Motor Assembly, 15 Year Structural Limited Warranty
Built in the USA
This lift has been designed to be used in low and fluctuating water levels. The 64" lift height gives you a lot of cradle travel to work with and keeps you from having to move the lift to shallow or deeper water.
The 54" telescoping legs get you installed up to a 7ft water depth. We can also provide longer legs and a bracing kit to get you in up to 10'' of water.
The large tapered pads or feet on this unit allow it to be moved across many different surfaces and lake bottoms without snagging or digging in. This is very helpful for seasonal installation and removal.
ABOUT HULL BUNKS
The BLD-V45120LT offers 5 options for bunk configurations. These options refer to the hardware that supports the watercraft on the lift cradle. This unit is offered with your choice boat support hardware for Single Hull, Deep V Hull / Skeg Hull, Pontoon and Tritoon applications.
Standard Hull Bunks are for standard hull watercraft that do not require additional clearance over the lift cradle. These bunks provide ample clearance for shallow V hulls, flat bottom, and round bottom boats.
Ski Hull Bunks are for those that require extra clearance over the cradle frame. These are commonly used with boats that have a deep V, or multi-hull design. Ski Hull Bunks are also suggested for a boat that has tracking skegs (look like upside down dorsal fins) mounted on the at the bottom of the hull. Skegs are mainly used on ski and wakeboard boats for tracking.
Dual Bunk Pontoon configurations are designed for pontoon boats and are made up of two sets of standard hull bunks configured so that each toon is supported independently.
The Pontoon Rack is also used for pontoon boats and uses aluminum hardware and 2x10x14 lumber to pick up the pontoon from beneath the deck of the boat. Lumber does not ship with this unit and must be provided by the customer.
Tritoon "Triple Bunk" configurations is designed to support each of the three toons found on Tritoons. Tritoon configurations include two sets of 12'' bunks for the outer toons and support the center toon with a single set of 10'' bunks.
This product ships out common carrier freight. Please add this product to your shopping cart and then enter your postal code for estimated shipping costs.
Ships out in 10 - 14 business days and is then picked up by a freight carrier for delivery.
Tracking information will be provided via email when the shipper catalogs the pick-up.