ShoreStation HA0362 – Revolution Screen Control Kit (For 6.0 Lift Systems)
The ShoreStation HA0362 Revolution Screen Control Kit is the required interface kit that allows a Revolution ShoreScreen™ system to operate through the ShoreStation Controller 6.0 platform. This kit provides all of the wiring, mounting hardware, and components needed to connect your screen system to a 6.0-enabled hydraulic lift for seamless, modern operation.
Note: The ShoreStation Controller 6.0 is not included with this kit. The 6.0 controller must be purchased separately for the HA0362 to function.
What the HA0362 Kit Does
If your ShoreScreen uses the latest Revolution-style motor hardware box, the HA0362 kit is what ties it into your lift’s 6.0 control system. Once installed, you’ll enjoy convenient ShoreScreen operation from every 6.0 interface. The HA0362 eliminates outdated key/toggle boxes and long cable runs, replacing them with a clean, factory-engineered wiring solution designed for 2026+ ShoreStation equipment.
What’s Included
- Revolution Screen Control Arm – attaches to the canopy frame and provides a dedicated keypad mount.
- 15 ft Relay Extension Harness – connects the Revolution motor relay to the 6.0 pump box.
- Black 5/16" Canopy Mounting Bolts, Washers, and Nuts
- Keypad Mounting Screws
The ShoreStation Controller 6.0 (HA0364 or HA0365) is required and sold separately.
Key Features
✔ Full 6.0 Integration
With the HA0362 installed, your ShoreScreen becomes part of the 6.0 ecosystem. Raise or lower the screen from the keypad, remote, or app with the same intuitive controls used for the lift itself.
✔ Clean, Professional Cable Routing
- Control arm provides a strong, clean mounting location for the 6.0 keypad.
- Harness routes internally through canopy frame for a tidy, factory-look installation.
- Wire tie points and grommet holes shown in the instructions simplify routing.
✔ Built for the New Revolution Screen System
Newer ShoreScreens include the updated Motor HDWE Box (74489) and no longer include legacy toggle or remote hardware. The HA0362 kit completes the connection to your 6.0 lift.
Compatibility
Use HA0362 If:
- Your lift already has the Controller 6.0 installed.
- You are installing a Revolution ShoreScreen with the new motor hardware box.
- Your lift has been upgraded with HA0364 (freestanding) or HA0365 (permanent).
Do Not Use HA0362 If:
- You have an older HPU012A or non-6.0 control system (you need HA0363).
- Your ShoreScreen uses a cube relay (requires relay upgrade first).
Installation Overview
1. Mount the Control Arm
- Install using the included 5/16" black hardware.
- Drill a 1" hole in the screen housing to feed the harness through.
2. Route the 50 ft Extension Harness
- Run the harness through the canopy frame and down the control arm.
- Secure neatly using wire ties as shown in the manual.
3. Mount the Keypad
- Install the bottom screw first, rotate keypad downward to plug in harness, then secure top screw.
4. Connect the Relay and Final Wiring
- Install relay according to the Owner’s Guide.
- Plug the 15 ft extension into the relay wiring, run down the canopy leg, and connect to the pump box.
- Store excess wire in the pump box or canopy frame.
Specifications
| Feature |
Details |
| Product |
Revolution Screen Control Kit |
| Part Number |
HA0362 |
| Screen Compatibility |
Revolution ShoreScreen with Motor HDWE Box (74489) |
| Lift Compatibility |
Any lift using the ShoreStation Controller 6.0 (sold separately) |
| Key Components |
Control arm, 50FT extension, 15FT relay harness, mounting hardware |
| Controller Included? |
No – 6.0 controller must be purchased separately |
Need Help Choosing the Right Screen Kit?
Not sure whether you need HA0362 or HA0363? Send us photos of your pump box, controller, and ShoreScreen motor box — we’ll confirm compatibility before you order.
