SHOREMASTER SHOREPORT REAR PIPE BRACKET - TAN

The Rear Poly Pipe Bracket attaches to the rear corner of an existing RhinoPort or ShorePort. When attached the rear Poly Bracket is used to anchor the section into location with the use of 2" schedule 40 pipe (pipe not included) and when parallel configurations are desired, it is recommended Universal Stand-Off Plate Assembly is also used. (sold separately).

When the Rear Poly Pipe Bracket is installed, a pipe is inserted through the collar of the bracket and then anchored into the lake bed to secure the platform into location. The collar installed on each Poly Pipe Bracket allows your RhinoPort or ShorePort to adjust when water levels fluctuate

 

KEY FEATURES

• Heavy Duty Aluminum Construction
• Easy to Install on most aluminum or wood-framed floating dock systems

 

The Rear Poly Pipe Bracket is recommended when mounting the section parallel to a freestanding dock, floating dock or seawall. When placing the section parallel to a freestanding dock, floating dock, or seawall the use of one Light Duty or Large Poly Pipe bracket (light-duty/ large bracket sold separately) and one Rear Poly Pipe bracket is required. The bracket should be located at the rear outside corners of the platform.

This bracket can also be used in perpendicular configurations that are in rough water areas. By adding the Rear Pipe bracket, it provides additional support and rigidity to the floating PWC dock.

 

INCLUDES

• Upper and Lower Poly Bracket
• Stainless Steel Attaching Hardware
• Hard Poly Spacer

 

ADDITIONAL INFORMATION

• Item may ship direct from the manufacturer.
• Tracking information will be provided via email when the shipper catalogs the pick-up.
• You can estimate your shipping charges by adding the item to your cart and entering your zip code into the shipping calculator.