Call Toll Free 866-942-6349

Boat Lifts, Boat Dock, Boat Lift Motors, Repair Parts and Accessories!

Home Sitemap Testimonials Shipping Contact Us

Boat Lifts and Boat Docks


Bookmark and Share
Home >> Aluminum Lifts >> Aluminum Boat Lifts >> High Lifts >> CraftLander 60120VHL Deep Water
CraftLander 60120VHL-EX is a 6000 lb. capacity vertical EXTRA high lift with a 120" max beam and a 84" lift height that can be installed in water depths up to 10' deep.

     

CraftLander 60120VHL Deep Water

CraftLander 60120VHL-EX is a 6000 lb. capacity vertical EXTRA high lift with a 120" max beam and a 84" lift height that can be installed in water depths up to 10' deep.


Email This To a Friend

Request Shipping Quote
Email Address:
Postal Code:
Country:


View Larger Images

Overview Specifications Requirements Reviews Q & A

CraftLander 60120v Boat Lifts are reliable, very well designed, 98% aluminum, vertical lifts that are priced much less than most of its comparable competition. The 6000 lb. model is very heavy duty lift and only needs as little as 8" of clearance when fully lowered.

CraftLander lifts are easier to crank than most lifts on the market today due to their patented "Positive Drive Winch" that is chain driven with roller bearings. The 60120VHL-EX has a 21:1 winch (21 turns or the wheel to 1 complete revolution of the drum) and raises about 1 inch every 2.5 turns of the wheel.


KEY FEATURES

  • 6000 lb. Max Lifting Capacity
  • 120" Max Beam (inside width)
  • 84" Lift Height (actual cradle travel)
  • Additional 36" Column Length
  • 12' Vinyl and Aluminum Hull Bunks
  • 98% Aluminum
  • 42" or 48" Aluminum Wheel
  • Galvanized or Stainless Steel Cables Available
  • 54" Telescoping Legs
  • 2 Year Mechanical and 15 Year Structural Limited Warranty


This lift has been designed to be used in deep water applications up to 10' in depth. The bracing on the lower framework helps to keep the lift stable at these depths.

This lift was designed for the canals in Manama, Bahrain that are 10' depths with concrete flat bottoms. They will also work in areas where the shoreline in on an incline, the deepest side would need to be no deeper than 120".


AVAILABLE ACCESSORIES

  • Canopy
  • Power Unit or Motor
  • Loading Guides
  • Motor Stop
  • Axle Brackets and Rim Plates (wheel for install and removal)
  • Stainless Steel Upgrade (makes lift all aluminum and stainless)


ADDITIONAL INFORMATION

This product ships out common carrier freight. Please contact us for a shipping prices and availability. Shipping available worldwide.

MODEL

  • Brand - Craftlander
  • Model # - 60120VHL-EX

 

OVERALL SIZE

  • Overall Width - Outside Foot Pad to Outside Foot Pad - 136"
  • Slip Width - Outside Upright to Outside Upright - 130"
  • Overall Length - 144"

 

FEATURES

  • Weight Capacity - 6000 lb
  • Beam Capacity - 120"
  • Lift Travel - 84"
  • Bunk Type - Vinyl over aluminum
  • Bunk Length - 144"
  • Supporting Legs - 54" Telescoping Legs with 42" of Adjustment
  • Color - Aluminum
  • Wheel - 42" or 48" Aluminum

 

CONSTRUCTION

  • Structure - 98% Aluminum (four galvanized steel plates to hold lower cable ends for strength)
  • Assembly Fasteners - Zinc plated fasteners
  • Cable Size - 5/16"
  • Cable Material - Galvanized winch cable / all other cables stainless steel
  • Pulley/Sheave Type - Glass-nylon
  • Weight of Unit - 815 lbs
  • Stainless Upgrade - Available and makes lift all aluminum and stainless steel

 

WARRANTY

  • 2 Year Mechanical
  • 15 Year Limited Warranty

INSTALL REQUIREMENTS

  • Water Depth Needed - 60" to 120"
  • Lake Bottom - Solid (may sink in extremely muddy areas with very deep bottoms)

 

POWER REQUIREMENTS

  • No Power Needed - Manual lift. Power supply needed only if motor is added

 

SHIPPING REQUIREMENTS

  • Ships - LTL Freight banded to pallet
  • Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
  • Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily

 

REQUIRED TOOLS FOR ASSEMBLY

  • 2 - 9/16" Wrench and Socket
  • 2 - 3/4" Wrench and Socket
  • 15/16" Wrench or Socket
  • 1 1/16" Wrench or Socket
  • 1 1/8" Wrench or Socket
  • Flat head screw driver
  • Crescent Wrench
  • Tape Measure to square lift
  • Gloves and safety goggles

FREQENTLY ASKED QUESTIONS

For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts.


What if my boat is heavier than the weight classification of the lift?

  • Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that your follow the weight ratings. Overloading the boat lift will void any manufactures warranty.

 

Can the wheel be placed on either side of the lift?

  • The wheel and winch can only be installed on one side, the winch post side. The way the cables are ran through the lift only allow the winch to be mounted on the one post.
  • If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.

Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.

INSTALL REQUIREMENTS

  • Water Depth Needed - 60" to 120"
  • Lake Bottom - Solid (may sink in extremely muddy areas with very deep bottoms)

 

POWER REQUIREMENTS

  • No Power Needed - Manual lift. Power supply needed only if motor is added

 

SHIPPING REQUIREMENTS

  • Ships - LTL Freight banded to pallet
  • Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
  • Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily

 

REQUIRED TOOLS FOR ASSEMBLY

  • 2 - 9/16" Wrench and Socket
  • 2 - 3/4" Wrench and Socket
  • 15/16" Wrench or Socket
  • 1 1/16" Wrench or Socket
  • 1 1/8" Wrench or Socket
  • Flat head screw driver
  • Crescent Wrench
  • Tape Measure to square lift
  • Gloves and safety goggles

FREQENTLY ASKED QUESTIONS

For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts.


What if my boat is heavier than the weight classification of the lift?

  • Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that your follow the weight ratings. Overloading the boat lift will void any manufactures warranty.

 

Can the wheel be placed on either side of the lift?

  • The wheel and winch can only be installed on one side, the winch post side. The way the cables are ran through the lift only allow the winch to be mounted on the one post.
  • If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.

CraftLander 60120VHL Deep Water - Models Available

CraftLander 60120VHL-EX with Stainless

CraftLander 60120VHL is a 6000lb capacity vertical high lift with a 120" max beam, a 84" lift height, extra long columns, lower framework bracing and zinc plated steel fasteners

SKU: 

Price: $5,980.00

Quantity:   

CraftLander 60120VHL-EX with Stainless Steel Hardware

CraftLander 60120VHL is a 6000lb capacity vertical high lift with a 120" max beam, a 84" lift height, extra long columns, lower framework bracing and stainless steel fasteners

SKU: 

Price: $6,390.00

Quantity:   

Home >> Aluminum Lifts >> Aluminum Boat Lifts >> High Lifts >> CraftLander 60120VHL Deep Water