The Lakeshore (LSP) 3000 lb capacity aluminum vertical boat lifts are designed to be easy to assemble, use and service. This lift also features fewer bolts and easy to change cables and sheaves. Each side of the lift offers easy, unobstructed access to your boat.
KEY FEATURES
- 3000 lb. max capacity
- 108" or 120" max beam (inside width)
- 54" lift height (actual cradle travel)
- Fully adjustable 2" x 8" x 12' carpeted hull bunks
- 98% aluminum (zinc plated fasteners)
- 41" powder coated aluminum wheel
- Galvanized Winch Cable for Strength (stainless available upon request)
- 36" telescoping adjustable legs
- Solid brass pulleys
Lakeshore has re-designed the winch on all their vertical lifts, now featuring an extra large drum that reduces wear on the cable and makes the lift easier to crank.
36" adjustable legs because lake bottoms are almost never perfectly flat. The legs may be removed for shallow water applications.
Solid brass pulleys, they are expensive but worth it. Brass is the best combination of high strength and low cable abrasion. It will not corrode and lasts a lifetime.
The large pads or feet on this unit allow it to be moved across many different surfaces and lake bottoms without snagging or digging in.
AVAILABLE ACCESSORIES
ADDITIONAL INFORMATION
This product ships out common carrier freight. Please contact us for a shipping prices and availability. Shipping available worldwide. |
MODEL
- Brand - Lakeshore Products or LSP
- Models # - LSV30108 & LSV30120
OVERALL SIZE
- Overall Width - Outside foot pad to outside foot pad
119" for the 108"
131" for the 120"
- Slip Width Needed - Outside upright to outside upright
115" for the 108"
127" for the 120"
- Overall Length - 144"
FEATURES
- Weight Capacity - 3000lb
- Beam Capacity - 108" or 120"
- Lift Travel - 54"
- Bunk Type - Full length carpeted hull bunk
- Bunk Size - 2" x 8" x 12'
- Supporting Legs - 36" telescoping legs
- Color - Aluminum
- Wheel - 41" painted aluminum
- Cradle - V-Shaped aluminum
CONSTRUCTION
- Structure - 98% Aluminum
- Fasteners - Zinc plated fasteners (stainless upgrade available)
- Cable Size - 5/16"
- Cable Material - Galvanized winch cable / all other cables stainless steel
- Pulley/Sheave Type - Solid brass
- Weight of Unit
395 lb for the LSV30108
405 lb for the LSV30120
- Winch - Steel winch housing
- Stainless Upgrade - Available and only changes the fasteners used to assemble the lift and the cables to stainless steel
WARRANTY
- 2 Year Mechanical
- 10 Year Limited Warranty
|
INSTALL REQUIREMENTS
- Water Depth Needed - 20" to 66" depending on draft of boat (draft of boat plus 7"). Up to 80" water depth with deep water kit
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 9/16" wrench and/or socket
- 2 - 3/4" wrench and/or socket
- Flat head screw driver
- Crescent wrench and Pliers
- Tape measure to square
- Gloves and safety glass
FREQUENTLY ASKED QUESTIONS
For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts
What if my boat is heavier than the weight classification of the lift?
- Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that you follow the weight ratings. Overloading the boat lift will void any manufactures warranty.
How long will it take me to build a new boat lift?
- As a first time builder it is a good idea to set aside 4-6 hours with the aid of a second person to construct a new boat lift for use. All boat lifts have a manual included with them to help in this process. Most of the work constructing a boat lift is connecting pieces with bolts and nuts. Very few tools are required for the assembly.
Can the wheel be placed on either side of the lift?
- The wheel and winch can only be installed on one side, the winch post side. The way the cables are run through the lift only allow the winch to be mounted on the one post.
- If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.
|
|
INSTALL REQUIREMENTS
- Water Depth Needed - 20" to 66" depending on draft of boat (draft of boat plus 7"). Up to 80" water depth with deep water kit
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 9/16" wrench and/or socket
- 2 - 3/4" wrench and/or socket
- Flat head screw driver
- Crescent wrench and Pliers
- Tape measure to square
- Gloves and safety glass
FREQUENTLY ASKED QUESTIONS
For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts
What if my boat is heavier than the weight classification of the lift?
- Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that you follow the weight ratings. Overloading the boat lift will void any manufactures warranty.
How long will it take me to build a new boat lift?
- As a first time builder it is a good idea to set aside 4-6 hours with the aid of a second person to construct a new boat lift for use. All boat lifts have a manual included with them to help in this process. Most of the work constructing a boat lift is connecting pieces with bolts and nuts. Very few tools are required for the assembly.
Can the wheel be placed on either side of the lift?
- The wheel and winch can only be installed on one side, the winch post side. The way the cables are run through the lift only allow the winch to be mounted on the one post.
- If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.
|
