22' x 100" SHELTER-RITE® CANOPY COVER FOR HEWITT FLARED END FRAME

The Hewitt 22' x 100" aftermarket Shelter-Rite® replacement boat lift canopy covers are specifically designed to fit existing Flared End style Hewitt 22' x 100" canopy frames. Each comes complete with canopy cover, attaching hardware and a storage bag.

Shelter-Rite® vinyl is an American Premium Fabric. Shelter-Rite® vinyl is engineered to exceed extensive performance criteria and is recognized by most in the industry as the best all-vinyl canopy material available. Shelter-Rite® is a heavy-duty 18oz PVC-coated polyester. Shelter-Rite® vinyl canopies outperform many other vinyl materials such as Shur-Tuff, Cover Tuff and Stamoid, in many key attributes.

Heavy duty tightly woven polyester fibers provide excellent tear, puncture & abrasion resistance. A high-performance vinyl formulation keeps the vinyl pliable, crack and peel-resistant, UV, mold, and mildew resistant. The 18 oz weight combined with heat-sealed welded seams makes Shelter-Rite® vinyl the most durable and number one used vinyl in the marine industry. Flat matte, smooth finish makes clean up very easy.

COVER DETAILS

• Includes 18.8oz Shelter-Rite® lift canopy cover and attachment hardware (canopy frame not included)
• Quiklash reinforced lacing canopy attachment system eliminates grommets, 25% stronger than traditional grommet system
• Quiklash webbing features UV and Mildew resistance for longer-lasting durability and strength
• Hot air rotary heat sealed and welded 1" overlapped seams on top panels and 1/2" on canopy ends
• Coats Dabond bonded and twisted continuous filament polyester threading with high UV and water resistance 
• Includes 5-year limited manufacturer's warranty
• 10" Valance Length

SHELTER-RITE® AVAILABLE COLORS

Shelter-Rite® Canopy covers are available in eleven color options.

QUICKLASH CANOPY ATTACHMENT SYSTEM

When you order a new replacement canopy cover, we include Bungee Attaching Hardware so that you can secure the cover to your canopy frame.  Below is an overview of the attachment system present with cover options as described above.

 

The Quicklash canopy attachment system provides a user-friendly and easy-to-install design with increased strength and durability over traditional attachment systems.  Sewn into the interior of the cover, Quicklash is a fabric strip with reinforced lacing holes to eliminate the need for grommets to secure the canopy.  The Quicklash webbing is reinforced with Armor Bar, a high-tenacity polyester yarn that provides increased tear resistance and strength.

 

The 2-1/8" wide Quicklash webbing allows for quick and customizable installation with 1" lacing holes spaced every 3".  The canopy cover is secured utilizing the Quicklash webbing and supplied bungees.  The 1/4" stretchable, nylon-covered, rubber bungees connect to any of the 1" lacing holes and then are secured to each specified attachment point on the existing canopy frame.  Once all bungees with a ball attached have been secured to the lower frame even tension is created around the perimeter of the canopy frame keeping the cover secure and in place on the frame.

HEWITT CANOPY FRAME MEASURING ASSISTANCE

FLARED END CANOPY FRAME DESIGN:  ROUNDED CORNERS

Below we have provided an image that illustrates how to measure your Flared End canopy frame in order to determine the proper size cover.  Hewitt canopy frames will have either a flared-rounded end or flat end frame design.  Flared frames are slightly peaked to the center of the frame and have rounded/flared frame end corners and are most typically found on frames of 22 ft in length or longer.  Typically above the lower canopy rail in the interior of the frame is a flat bar or a welded tie bar running the length of the frame for bungee attachment.Canopy ribs normally sit on top of a 3 inch by 3 inch square side frame tube. Washers are typically welded on the ends for tie down attachment.

• Length Measurement:  Outside length along the center of frame from front to back. Lengths are in 2 foot increments
• Width Measurement:  Outside width of lower canopy rail on a centerline from left to right.

Important Note:  Canopy covers are custom and built to order, each is Specific to the frame make and size.  It is important that the correct make and size canopy cover is ordered. Canopies returned due to incorrect size or make ordering errors are subject to restocking fees and in some cases may not be returnable.  If replacing an existing cover, check for a canopy tag for size information or contact the canopy frame manufacturer.  If you have any fit related questions after reviewing measuring instructions, please contact us. If contacting us for sizing assistance, please have images of the canopy frame in question available and measurements as outlined above.