The CraftLander 12DPWC was designed for 2 PWC's or jet skis 750 lbs. or less. This is a dual cantilever style lift that places two jet ski lifts side by side. Each side of this unit operates independently of each other allowing one ski to be lowered at a time.
KEY FEATURES (per side)
- 750 lb Max Lifting Capacity
- 60" Max Beam
- 30" Lift Height (actual cradle travel)
- 98% Aluminum (zinc plated fasteners)
- Galvanized Steel Cable (stainless steel available upon request)
- 72" Carpeted Hull Bunks
- 5" Boat Loading Clearance at Bottom
- 18" Telescoping Adjustable Legs (extension legs available)
- 2 Year Mechanical and 15 Year Structural Limited Warranty
The tapered pads or feet on this unit allow it to be moved across many different surfaces and lake bottoms without snagging or digging in.
AVAILABLE ACCESSORIES
- Canopy
- Stainless Steel Upgrade (makes lift all aluminum and stainless)
ADDITIONAL INFORMATION
This product ships out common carrier freight. Please contact us for a shipping prices and availability. Shipping available worldwide. |
MODEL
- Brand - Craftlander
- Model # - 12DPWC
OVERALL SIZE
- Overall Width - Outside Foot Pad to Outside Foot Pad - 134"
- Slip Width - Outside Upright to Outside Upright - 128"
- Overall Length - 72"
FEATURES
- Weight Capacity - 750 lbs per side
- Beam Capacity - 60" per side
- Lift Travel - 30" per side
- Bunk Type - Carpeted Bunk
- Bunk Length - 72"
- Supporting Legs - 18" Telescoping Legs
- Color - Aluminum
CONSTRUCTION
- Structure - 98% Aluminum
- Assembly Fasteners - Zinc plated fasteners
- Cable Size - 1/4"
- Cable Material - Galvanized winch cable / all other cables stainless steel
- Pulley/Sheave Type - Vinyl
- Weight of Unit - 250 lbs
- Stainless Upgrade - Available and makes lift all aluminum and stainless steel
WARRANTY
- 2 Year Mechanical
- 15 Year Limited Warranty
|
INSTALL REQUIREMENTS
- Water Depth Needed - 18" to 42" depending on draft of watercraft. Extension legs are available
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 1/2" Wrench and/or Socket
- 2 - 9/16" Wrench and/or Socket
- 2 - 3/4" Wrench Socket
- Flat head screw driver
- Crescent Wrench
- Tape Measure to square lift
- Gloves and safety glasses
Freqently Asked Questions:
For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts.
How do I determine which size of Jet Ski / Wave Runner Lift I need?
- The size of lift required for a Jet Ski is determined by the weight of the Jet Ski and not the size. You should be able to find your loaded Jet Ski weight in your owner manual or, by contacting the manufacturer.
Can I lower one side at a time?
- Yes, this lift is designed so that each side of the lift is operated independantly of the other. Each side has its own winch, wheel and cable.
|
|
INSTALL REQUIREMENTS
- Water Depth Needed - 18" to 42" depending on draft of watercraft. Extension legs are available
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 1/2" Wrench and/or Socket
- 2 - 9/16" Wrench and/or Socket
- 2 - 3/4" Wrench Socket
- Flat head screw driver
- Crescent Wrench
- Tape Measure to square lift
- Gloves and safety glasses
Freqently Asked Questions:
For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts.
How do I determine which size of Jet Ski / Wave Runner Lift I need?
- The size of lift required for a Jet Ski is determined by the weight of the Jet Ski and not the size. You should be able to find your loaded Jet Ski weight in your owner manual or, by contacting the manufacturer.
Can I lower one side at a time?
- Yes, this lift is designed so that each side of the lift is operated independantly of the other. Each side has its own winch, wheel and cable.
|
