The CraftLander 45120v Tritoon Lift is a 4500 lb capacity, 120" wide vertical tritoon lift and is equipped with 3 sets of bunks, supporting each pontoon providing stability and safety.
CraftLander lifts are easier to crank than most lifts on the market today due to their patented "Positive Drive Winch" that is chain driven with roller bearings. The 45120v has a 16:1 winch (16 turns or the wheel to 1 complete revolution of the drum) and raises about 1 inch every 2 turns of the wheel.
KEY FEATURES
- 4500 lb. Max Lifting Capacity
- 120" Max Beam (inside width)
- 64" Lift Height (actual cradle travel)
- 10' Vinyl and Aluminum Hull Bunks (12' Bunks available upon request)
- 98% Aluminum
- 42" or 48" Aluminum Wheel
- Galvanized or Stainless Steel Cables Available
- 54" Telescoping Legs
- 2 Year Mechanical and 15 Year Structural Limited Warranty
This lift has been designed to be used in low and fluctuating water levels. The 64" lift height gives you a lot of cradle travel to work with and keeps you from having to move the lift to shallow or deeper water.
The 54" telescoping legs get you installed up to a 7 foot water depth. We can also provide longer legs and a bracing kit to get you in up to 10' of water.
The large tapered pads or feet on this unit allow it to be moved across many different surfaces and lake bottoms without snagging or digging in. This is very helpful for seasonal installation and removal.
AVAILABLE ACCESSORIES
- Canopy
- Power Unit or Motor
- Loading Guides
- Motor Stop
- Axle Brackets and Rim Plates (wheel for install and removal)
- Stainless Steel Upgrade (makes lift all aluminum and stainless)
ADDITIONAL INFORMATION
This product ships out common carrier freight. Please contact us for a shipping prices and availability. Shipping available worldwide. |
MODEL
- Brand - Craftlander
- Model # - 45120V
OVERALL SIZE
- Overall Width - Outside Foot Pad to Outside Foot Pad - 134"
- Slip Width - Outside Upright to Outside Upright - 128"
- Overall Length - 120"
FEATURES
- Weight Capacity - 4500lb
- Beam Capacity - 120"
- Lift Travel - 64"
- Bunk Type - 3 sets of vinyl over aluminum bunks
- Bunk Length - 120"
- Supporting Legs - 54" Telescoping Legs with 42" of adjustment
- Color - Aluminum
- Wheel - 42" or 48" Aluminum
CONSTRUCTION
Structure - 98% Aluminum (four galvanized steel plates to hold lower cable ends for strength)
Assembly Fasteners - Zinc plated fasteners
Cable Size - 5/16"
Cable Material - Galvanized winch cable / all other cables stainless steel
Pulley/Sheave Type - Glass-nylon
Weight of Unit - 485lb
Stainless Upgrade - Available and makes lift all aluminum and stainless steel
WARRANTY
- 2 Year Mechanical
- 15 Year Limited Warranty
|
INSTALL REQUIREMENTS
- Water Depth Needed - 20" to 66" depending on draft of boat (draft of boat plus 7"). Up to 84" water depth with deep water kit
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 1/2" wrench and/or socket
- 2 - 9/16" wrench and/or socket
- 2 - 3/4" wrench and/or socket
- Flat head screw driver
- Crescent wrench and Pliers
- Tape measure to square
|
Product Rating:  (5.00) # of Ratings: 1 (Only registered customers can rate)
There are no comments for this product.
|
|
|
Question:Can the wheel be placed on either side of the lift?
-
Gary
(02/28/2013)
Response:The wheel and winch can only be installed on one side, the winch post side. The way the cables are run through the lift only allow the winch to be mounted on the one post.
If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.
Question:How long will it take me to build a new boat lift?
-
Gary
(02/28/2013)
Response:As a first time builder it is a good idea to set aside 4-6 hours with the aid of a second person to construct this unit. We provide links to assembly videos for this lift on our YouTube page (a link can be found in the upper right hand corner of this page).
Question:What if my boat is heavier than the weight classification of the lift?
-
Gary
(02/28/2013)
Response:Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that you follow the weight ratings. Overloading the boat lift will void any manufactures warranty.
INSTALL REQUIREMENTS
- Water Depth Needed - 20" to 66" depending on draft of boat (draft of boat plus 7"). Up to 84" water depth with deep water kit
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 1/2" wrench and/or socket
- 2 - 9/16" wrench and/or socket
- 2 - 3/4" wrench and/or socket
- Flat head screw driver
- Crescent wrench and Pliers
- Tape measure to square
|