Call Toll Free 866-942-6349

Marine Lifts, Boat Dock, Boat Lift Motors, Repair Parts and Accessories!

Categories



Previous  Up  Next" 

Lakeshore 4000lb Capacity Pontoon Lifts

Lakeshore (LSP) LSV40120BP is a 4000 lb. capacity vertical pontoon lift with a 120" max beam, 52" lift height and a dual bunk set-up or pontoon rack setup


Our Price: $2,802.00 


Email This To a Friend
Request Shipping Quote
Country:
State/Province:
Zip:
Shipping Estimate:


Lakeshore 4000lb Capacity Pontoon Lifts - Models Available

Lakeshore LSV40120BP-D

Lakeshore (LSP) LSV40120BPU is a 4000lb capacity vertical lift with a 120" max beam, 52" lift height and a pontoon rack bunk system. - 2"x10"x14' Lumber Not Included

**pictured with side loading guides, sold separately

SKU: LSV40120

Price: $2,802.00 

Quantity:   

Lakeshore LSV40120BP

Lakeshore (LSP) LSV40120BP is a 4000lb capacity vertical lift with a 120" max beam, 52" lift height and a dual bunk set-up

SKU: LSV40120

Price: $3,130.00 

Quantity:   

The Lakeshore LSV40120BP vertical pontoon lift is designed to be easy to assemble, use and service. This lift also features fewer bolts and easy to change cables and sheaves. Picture shown is of the 3000 lb capacity and is a very similar lift.

The LSV40120BP is equipped with a dual set of carpeted bunks to support your pontoon above the cradle.

The LSV40120BPU is equipped with a pontoon rack that lifts from beneath the deck of your pontoon.


KEY FEATURES

  • 4000 lb. Max Lifting Capacity
  • 120" Max Beam (inside width - upright to upright)
  • 52" Lift Height (actual cradle travel)
  • Dual 12ft Hull Bunks or Pontoon Rack
  • 98% Aluminum (zinc plated fasteners)
  • 36" Telescoping Adjustable Legs
  • Galvanized Winch Cable for Strength (stainless available upon request)
  • 2 Year Mechanical and 10 Year Structural Limited Warranty


Lakeshore has re-designed the winch on all their vertical lifts, now featuring an extra large drum that reduces wear on the cable and makes the lift easier to crank.

36" adjustable legs because lake bottoms are almost never perfectly flat. The legs may be removed for shallow water applications.

Solid brass pulleys, they are expensive but worth it. Brass is the best combination of high strength and low cable abrasion. It will not corrode and lasts a lifetime.

The large pads or feet on this unit allow it to be moved across many different surfaces and lake bottoms without snagging or digging in.


AVAILABLE ACCESSORIES

  • Canopy
  • Walk-On Load Guides
  • Direct Drive Power Unit / Electric Drive
  • Extension Legs
  • Wheel Kit (wheel for install and removal)


ADDITIONAL INFORMATION

This product ships out common carrier freight. Please contact us for a shipping prices and availability. Shipping available worldwide.

© 2013 BoatLiftandDock.com

MODEL

  • Brand - Lakeshore (LSP)
  • Model # - LSV40120BP/BPU

 

OVERALL SIZE

  • Overall Width - Outside foot pad to outside foot pad - 135"
  • Overall Length - Outside upright to outside upright - 128"
  • Overall Length - 144"

 

FEATURES

  • Weight Capacity - 4000 lb
  • Beam Capacity - 120"
  • Lift Travel - 54"
  • Bunk Type - 2" x 8" Full length carpeted hull bunk
  • Bunk Length - 144"
  • Supporting Legs - 36" telescoping legs
  • Color - Aluminum
  • Wheel - 41" painted aluminum
  • Cradle - Aluminum I-beam

 

CONSTRUCTION

  • Structure - 98% Aluminum
  • Cable Size - 5/16"
  • Cable Material - Galvanized winch cable / all other cables stainless steel
  • Pulley/Sheave Type - Solid brass
  • Weight of Unit - 450 lbs
  • Winch - Steel winch housing

 

WARRANTY

  • 2 Year Mechanical
  • 10 Year Limited Warranty

INSTALL REQUIREMENTS

  • Water Depth Needed - 20" to 66" depending on draft of pontoons. Up to 80" water depth with deep water kit
  • Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)

 

POWER REQUIREMENTS

  • No Power Needed - Manual lift. Power supply needed only if motor is added

 

SHIPPING REQUIREMENTS

  • Ships - LTL Freight banded to pallet
  • Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
  • Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily

 

REQUIRED TOOLS FOR ASSEMBLY

  • 2 - 9/16" wrench and/or socket
  • 2 - 3/4" wrench and/or socket
  • Flat head screw driver
  • Crescent wrench and Pliers
  • Tape measure to square
  • Gloves and safety glass




Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.
Frequently Asked Questions
Question:Can the wheel be placed on either side of the lift? - Gary (02/28/2013)
Response:The wheel and winch can only be installed on one side, the winch post side. The way the cables are run through the lift only allow the winch to be mounted on the one post. If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.
Question:How long will it take me to build a new boat lift? - Gary (02/28/2013)
Response:As a first time builder it is a good idea to set aside 4-6 hours with the aid of a second person to construct this unit. We provide links to assembly videos for this lift on our YouTube page (a link can be found in the upper right hand corner of this page).
Question:What if my boat is heavier than the weight classification of the lift? - Gary (02/28/2013)
Response:Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that you follow the weight ratings. Overloading the boat lift will void any manufactures warranty.

INSTALL REQUIREMENTS

  • Water Depth Needed - 20" to 66" depending on draft of pontoons. Up to 80" water depth with deep water kit
  • Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)

 

POWER REQUIREMENTS

  • No Power Needed - Manual lift. Power supply needed only if motor is added

 

SHIPPING REQUIREMENTS

  • Ships - LTL Freight banded to pallet
  • Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
  • Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily

 

REQUIRED TOOLS FOR ASSEMBLY

  • 2 - 9/16" wrench and/or socket
  • 2 - 3/4" wrench and/or socket
  • Flat head screw driver
  • Crescent wrench and Pliers
  • Tape measure to square
  • Gloves and safety glass