Lakeshore LSV30120BP Pontoon
Lakeshore (LSP) LSV30120BP is a 3000 lb. capacity vertical pontoon lift with a 120" max beam, 52" lift height and a dual bunk set-up
Email This To a Friend
Request Shipping Quote
View Larger Images
The Lakeshore LSV30120BP Vertical Pontoon Lift is designed to be easy to assemble, use and service. The 3000 lb. capacity lifts are unique in that they can easily be upgraded to 4000 lb. capacity at any time. This lift also features fewer bolts and easy to change cables and sheaves.
The LSV30120BP is equipped with a dual set of carpeted bunks to support your pontoon above the cradle.
KEY FEATURES
- 3000 lb. Max Lifting Capacity
- 120" Max Beam (inside width - upright to upright)
- 52" Lift Height (actual cradle travel)
- Dual 12ft Hull Bunks
- 98% Aluminum (zinc plated fasteners)
- 36" Telescoping Adjustable Legs
- Galvanized Winch Cable for Strength (stainless available upon request)
- 2 Year Mechanical and 10 Year Structural Limited Warranty
Lakeshore has re-designed the winch on all their vertical lifts, now featuring an extra large drum that reduces wear on the cable and makes the lift easier to crank.
36" adjustable legs because lake bottoms are almost never perfectly flat. The legs may be removed for shallow water applications.
Solid brass pulleys, they are expensive but worth it. Brass is the best combination of high strength and low cable abrasion. It will not corrode and lasts a lifetime.
The large pads or feet on this unit allow it to be moved across many different surfaces and lake bottoms without snagging or digging in.
AVAILABLE ACCESSORIES
- Canopy
- Walk-On Load Guides
- Direct Drive Power Unit / Electric Drive
- Extension Legs
- Wheel Kit (wheel for install and removal)
ADDITIONAL INFORMATION
This product ships out common carrier freight. Please contact us for a shipping prices and availability. Shipping available worldwide.
INSTALL REQUIREMENTS
- Water Depth Needed - 20" to 66" depending on draft of pontoons. Up to 80" water depth with deep water kit
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 9/16" wrench and/or socket
- 2 - 3/4" wrench and/or socket
- Flat head screw driver
- Crescent wrench and Pliers
- Tape measure to square
- Gloves and safety glass
FREQENTLY ASKED QUESTIONS
For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts
What if my boat is heavier than the weight classification of the lift?
- Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that your follow the weight ratings. Overloading the boat lift will void any manufactures warranty.
Can the wheel be placed on either side of the lift?
- The wheel and winch can only be installed on one side, the winch post side. The way the cables are ran through the lift only allow the winch to be mounted on the one post.
- If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.
Related Links
Lakeshore LSV30120BP Pontoon - Models Available
Lakeshore LSV30120BP
Lakeshore (LSP) LSV30120BP is a 3000lb capacity vertical lift with a 120" max beam, 52" lift height and a dual bunk set-up
SKU:
Price: $2,857.00
Lakeshore LSV30120BP with Stainless Steel
Lakeshore (LSP) LSV30120BP is a 3000lb capacity vertical lift with a 120" max beam, 52" lift height, a dual bunk set-up and stainless steel hardware package
SKU:
Price: $2,957.00
