The CraftLander 35120v vertical pontoon boat lift is a reliable, very well designed, 98% aluminum lift that is priced much less than most of its comparable competition. This 3500 lb. capacity lift is equipped with a rack that picks up your pontoon from beneath the deck. This provides a very stable system for lifting and storing your pontoon and is easier to park on than dual bunk set-ups.
CraftLander lifts are easier to crank than most lifts on the market today due to their patented "Positive Drive Winch" that is chain driven with roller bearings. The 35120v has a 11:1 winch (11 turns or the wheel to 1 complete revolution of the drum) and raises about 1 inch every 2 turns of the wheel.
KEY FEATURES
- 3500 lb. Max Lifting Capacity
- 120" Max Beam (inside width - upright to upright)
- 64" Lift Height (actual cradle travel)
- Patented Double Reduction Winch
- Pontoon Rack
- 98% Aluminum (zinc plated fasteners)
- 20" or 55" Telescoping Adjustable Legs
- Galvanized Winch Cable for Strength (stainless available upon request)
- 2 Year Mechanical and 15 Year Structural Limited Warranty
The 64" lift height and the 54" telescoping legs give you a lot of cradle travel to work with and keeps you from having to move the lift to shallow or deeper water.
The large tapered pads or feet on this unit allow it to be moved across many different surfaces and lake bottoms without snagging or digging in.
This is very helpful for seasonal installation and removal.
AVAILABLE ACCESSORIES
- Canopy
- Power Unit or Motor
- Loading Guides
- Motor Stop
- Axle Brackets and Rim Plates (wheel for install and removal)
- Stainless Steel Upgrade (makes lift all aluminum and stainless)
ADDITIONAL INFORMATION
This product ships out common carrier freight. Please contact us for a shipping prices and availability. Shipping available worldwide. |
MODEL
- Brand - Craftlander
- Model # - 35120V Pontoon
OVERALL SIZE
- Overall Width - Outside Foot Pad to Outside Foot Pad - 136"
- Slip Width - Outside Upright to Outside Upright - 129"
- Overall Length - 120"
FEATURES
- Weight Capacity - 3500 lb
- Beam Capacity - 120"
- Lift Travel - 64"
- Bunk Type - Pontoon Rack
- Bunk Length - 168"
- Supporting Legs - 54" Telescoping Legs with 42" of Adjustment
- Color - Aluminum
- Wheel - 42" or 48" Aluminum
CONSTRUCTION
- Structure - 98% Aluminum (four galvanized steel plates to hold lower cable ends for strength)
- Assembly Fasteners - Zinc plated fasteners
- Cable Size - 5/16"
- Cable Material - Galvanized winch cable / all other cables stainless steel
- Pulley/Sheave Type - Glass-nylon
- Weight of Unit - 430 lbs
- Stainless Upgrade - Available and makes lift all aluminum and stainless steel
WARRANTY
- 2 Year Mechanical
- 15 Year Limited Warranty
|
INSTALL REQUIREMENTS
- Water Depth Needed - 20" to 60" depending on draft of pontoon boat. Up to 84" water depth with deep water kit
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 9/16" Wrench and Socket
- 2 - 3/4" Wrench and Socket
- 15/16" Wrench Socket
- Flat head screw driver
- Crescent Wrench
- Tape Measure to square lift
FREQENTLY ASKED QUESTIONS
For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts
What if my boat is heavier than the weight classification of the lift?
- Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that your follow the weight ratings. Overloading the boat lift will void any manufactures warranty.
How long would it take to assemble this lift?
- Assembly is not too bad...the lift is shipped knocked down enough for us to ship it on a 4'x10' pallet. It is mainly extrusions and i-beams. There is no measuring involved and a limited amount of tools;
- 2 - 9/16" wrench and/or socket
- 2 - 3/4" wrench and/or socket
- Flat head screw driver
- Crescent wrench and Pliers
- Tape measure to square
- Gloves and safety glass
- Most of the work constructing the lift is connecting pieces with bolts and nuts. First time builders average approximately 4 hours to build.
Can the wheel be placed on either side of the lift?
- The wheel and winch can only be installed on one side, the winch post side. The way the cables are ran through the lift only allow the winch to be mounted on the one post.
- If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.
|
|
INSTALL REQUIREMENTS
- Water Depth Needed - 20" to 60" depending on draft of pontoon boat. Up to 84" water depth with deep water kit
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 9/16" Wrench and Socket
- 2 - 3/4" Wrench and Socket
- 15/16" Wrench Socket
- Flat head screw driver
- Crescent Wrench
- Tape Measure to square lift
FREQENTLY ASKED QUESTIONS
For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts
What if my boat is heavier than the weight classification of the lift?
- Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that your follow the weight ratings. Overloading the boat lift will void any manufactures warranty.
How long would it take to assemble this lift?
- Assembly is not too bad...the lift is shipped knocked down enough for us to ship it on a 4'x10' pallet. It is mainly extrusions and i-beams. There is no measuring involved and a limited amount of tools;
- 2 - 9/16" wrench and/or socket
- 2 - 3/4" wrench and/or socket
- Flat head screw driver
- Crescent wrench and Pliers
- Tape measure to square
- Gloves and safety glass
- Most of the work constructing the lift is connecting pieces with bolts and nuts. First time builders average approximately 4 hours to build.
Can the wheel be placed on either side of the lift?
- The wheel and winch can only be installed on one side, the winch post side. The way the cables are ran through the lift only allow the winch to be mounted on the one post.
- If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.
|
