CraftLander 60120v Boat Lifts are reliable, very well designed, 98% aluminum, vertical lifts that are priced much less than most of its comparable competition. The 6000 lb. model is very heavy duty lift and only needs as little as 8" of clearance when fully lowered.
CraftLander lifts are easier to crank than most lifts on the market today due to their patented "Positive Drive Winch" that is chain driven with roller bearings. The 60120v has a 21:1 winch (21 turns or the wheel to 1 complete revolution of the drum) and raises about 1 inch every 2.5 turns of the wheel.
KEY FEATURES
- 6000 lb. Max Lifting Capacity
- 120" Max Beam (inside width)
- 60" Lift Height (actual cradle travel)
- 12' Vinyl and Aluminum Hull Bunks
- 98% Aluminum
- 42" or 48" Aluminum Wheel
- Galvanized or Stainless Steel Cables Available
- 30" Telescoping Legs
- 2 Year Mechanical and 15 Year Structural Limited Warranty
AVAILABLE ACCESSORIES
- Canopy
- Power Unit or Motor
- Loading Guides
- Motor Stop
- Axle Brackets and Rim Plates (wheel for install and removal)
- Stainless Steel Upgrade (makes lift all aluminum and stainless)
ADDITIONAL INFORMATION
This product ships out common carrier freight. Please contact us for a shipping prices and availability. Shipping available worldwide. |
MODEL
- Brand - Craftlander
- Model # - 60120V
OVERALL SIZE
- Overall Width - Outside Foot Pad to Outside Foot Pad - 136"
- Slip Width - Outside Upright to Outside Upright - 130"
- Overall Length - 144"
FEATURES
- Weight Capacity - 6000 lb
- Beam Capacity - 120"
- Lift Travel - 64"
- Bunk Type - Vinyl over aluminum
- Bunk Length - 144"
- Supporting Legs - 30" Telescoping Legs with 22" of Adjustment
- Color - Aluminum
- Wheel - 42" or 48" Aluminum
CONSTRUCTION
- Structure - 98% Aluminum (four galvanized steel plates to hold lower cable ends for strength)
- Assembly Fasteners - Zinc plated fasteners
- Cable Size - 5/16"
- Cable Material - Galvanized winch cable / all other cables stainless steel
- Pulley/Sheave Type - Glass-nylon
- Weight of Unit - 620 lbs
- Stainless Upgrade - Available and makes lift all aluminum and stainless steel
WARRANTY
- 2 Year Mechanical
- 15 Year Limited Warranty
|
INSTALL REQUIREMENTS
- Water Depth Needed - 24" to 60" depending on draft of boat (draft of boat plus 7"). Up to 76" water depth with deep water kit and up to 120" with special order kit
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 9/16" Wrench and Socket
- 2 - 3/4" Wrench and Socket
- 15/16" Wrench or Socket
- 1 1/16" Wrench or Socket
- 1 1/8" Wrench or Socket
- Flat head screw driver
- Crescent Wrench
- Tape Measure to square lift
- Gloves and safety goggles
FREQENTLY ASKED QUESTIONS
For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts.
What if my boat is heavier than the weight classification of the lift?
- Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that your follow the weight ratings. Overloading the boat lift will void any manufactures warranty.
How long will it take me to build a new boat lift?
- As a first time builder it is a good idea to set aside 4-6 hours with the aid of a second person to construct a new boat lift for use. All boat lifts have a manual included with them to help in this process. Most of the work constructing a boat lift is connecting pieces with bolts and nuts. Tools required for the job is very minimal. If you encounter any issues regarding the assembly of your lift please contact boatliftanddock.com. One of our service representatives will be happy to provide you with additional aid.
Can the wheel be placed on either side of the lift?
- The wheel and winch can only be installed on one side, the winch post side. The way the cables are ran through the lift only allow the winch to be mounted on the one post.
- If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.
|
|
INSTALL REQUIREMENTS
- Water Depth Needed - 24" to 60" depending on draft of boat (draft of boat plus 7"). Up to 76" water depth with deep water kit and up to 120" with special order kit
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 9/16" Wrench and Socket
- 2 - 3/4" Wrench and Socket
- 15/16" Wrench or Socket
- 1 1/16" Wrench or Socket
- 1 1/8" Wrench or Socket
- Flat head screw driver
- Crescent Wrench
- Tape Measure to square lift
- Gloves and safety goggles
FREQENTLY ASKED QUESTIONS
For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts.
What if my boat is heavier than the weight classification of the lift?
- Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that your follow the weight ratings. Overloading the boat lift will void any manufactures warranty.
How long will it take me to build a new boat lift?
- As a first time builder it is a good idea to set aside 4-6 hours with the aid of a second person to construct a new boat lift for use. All boat lifts have a manual included with them to help in this process. Most of the work constructing a boat lift is connecting pieces with bolts and nuts. Tools required for the job is very minimal. If you encounter any issues regarding the assembly of your lift please contact boatliftanddock.com. One of our service representatives will be happy to provide you with additional aid.
Can the wheel be placed on either side of the lift?
- The wheel and winch can only be installed on one side, the winch post side. The way the cables are ran through the lift only allow the winch to be mounted on the one post.
- If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.
|
