CraftLander 35120v vertical aluminum boat lifts are reliable, very well designed, 98% aluminum lifts that are priced much less than most of their comparable competition. This is great for wide boats, pontoons and some tritoons with the 120" max beam and the 3500 lb capacity. This allows a 102" width boat or pontoon to enter with ease and still allows space for load guides.
CraftLander lifts are easier to crank than most lifts on the market today due to their patented "Positive Drive Winch" that is chain driven with roller bearings. The 35120v has a 11:1 winch (11 turns or the wheel to 1 complete revolution of the drum) and raises about 1 inch every 2 turns of the wheel.
KEY FEATURES
- 3500 lb. Max Lifting Capacity
- 120" Max Beam
- 64" Lift Height (actual cradle travel)
- Patented Double Reduction Winch
- 10' Vinyl Hull Bunks (pontoon kits available)
- 440lb. Overall Weight
- 54" Telescoping Legs Standard (42" usable)
- 5/16" Stainless Cables
- 2 Year Mechanical and 15 Year Structural Limited Warranty
The CraftLander has been designed to be used in low and fluctuating water levels. The 64" lift height gives you plenty of cradle travel to work with if the water is high or low and keeps you from having to move the lift to shallow or deeper water.
The large pads or feet on this unit allow it to be moved across many different surfaces and lake bottoms without snagging or digging in.
AVAILABLE ACCESSORIES
- Canopy
- Loading / Centering Guides
- Direct Drive Power Unit / Electric Drive
- Motor Stop
- Stainless Steel Upgrade
- Wheels for Install and Removal
ADDITIONAL INFORMATION
This product ships out common carrier freight. Please contact us for a shipping prices and availability. Shipping available worldwide. |
MODEL
- Brand - Craftlander
- Model # - 35120V
OVERALL SIZE
- Overall Width - Outside Foot Pad to Outside Foot Pad - 134"
- Slip Width - Outside Upright to Outside Upright - 128"
- Overall Length - 120"
FEATURES
- Weight Capacity - 3500lb
- Beam Capacity - 120"
- Lift Travel - 64"
- Bunk Type - Vinyl over aluminum
- Bunk Length - 120"
- Supporting Legs - 54" Telescoping Legs with 42" of adjustment
- Color - Aluminum
- Wheel - 42" or 48" Aluminum
CONSTRUCTION
Structure - 98% Aluminum (four galvanized steel plates to hold lower cable ends for strength)
Assembly Fasteners - Zinc plated fasteners
Cable Size - 5/16"
Cable Material - Galvanized winch cable / all other cables stainless steel
Pulley/Sheave Type - Glass-nylon
Weight of Unit - 475lb
Stainless Upgrade - Available and makes lift all aluminum and stainless steel
WARRANTY
- 2 Year Mechanical
- 15 Year Limited Warranty
|
INSTALL REQUIREMENTS
- Water Depth Needed - 24" to 72" depending on draft of boat (draft of boat plus 7"). Up to 90" water depth with deep water kit
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 9/16" Wrench and Socket
- 2 - 3/4" Wrench and Socket
- 15/16" Wrench Socket
- Flat head screw driver
- Crescent Wrench
- Tape Measure to square lift
FREQENTLY ASKED QUESTIONS
For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts.
My boat / pontoon only has a 96" beam, do I need the 120" width lift?
- A beam of 96" really allows you to go either way, with the 108" you will have 12" of play and with the 120" you will have 24" of play. Some people like the snug fit of the 108". If you are looking to add loading guides, they do take up about 11" of your width, which would make the 108" width very tight.
What if my boat is heavier than the weight classification of the lift?
- Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that your follow the weight ratings. Overloading the boat lift will void any manufactures warranty.
How long will it take me to build a new boat lift?
- As a first time builder it is a good idea to set aside 4-6 hours with the aid of a second person to construct a new boat lift for use. All boat lifts have a manual included with them to help in this process. Most of the work constructing a boat lift is connecting pieces with bolts and nuts. Tools required for the job is very minimal. If you encounter any issues regarding the assembly of your lift please contact boatliftanddock.com. One of our service representatives will be happy to provide you with additional aid.
Can the wheel be placed on either side of the lift?
- The wheel and winch can only be installed on one side, the winch post side. The way the cables are ran through the lift only allow the winch to be mounted on the one post.
- If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.
|
|
INSTALL REQUIREMENTS
- Water Depth Needed - 24" to 72" depending on draft of boat (draft of boat plus 7"). Up to 90" water depth with deep water kit
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 9/16" Wrench and Socket
- 2 - 3/4" Wrench and Socket
- 15/16" Wrench Socket
- Flat head screw driver
- Crescent Wrench
- Tape Measure to square lift
FREQENTLY ASKED QUESTIONS
For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts.
My boat / pontoon only has a 96" beam, do I need the 120" width lift?
- A beam of 96" really allows you to go either way, with the 108" you will have 12" of play and with the 120" you will have 24" of play. Some people like the snug fit of the 108". If you are looking to add loading guides, they do take up about 11" of your width, which would make the 108" width very tight.
What if my boat is heavier than the weight classification of the lift?
- Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that your follow the weight ratings. Overloading the boat lift will void any manufactures warranty.
How long will it take me to build a new boat lift?
- As a first time builder it is a good idea to set aside 4-6 hours with the aid of a second person to construct a new boat lift for use. All boat lifts have a manual included with them to help in this process. Most of the work constructing a boat lift is connecting pieces with bolts and nuts. Tools required for the job is very minimal. If you encounter any issues regarding the assembly of your lift please contact boatliftanddock.com. One of our service representatives will be happy to provide you with additional aid.
Can the wheel be placed on either side of the lift?
- The wheel and winch can only be installed on one side, the winch post side. The way the cables are ran through the lift only allow the winch to be mounted on the one post.
- If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.
|
