The CraftLander 3500 lb capacity models are very similar to the 4500's, they are reliable, well designed, aluminum, vertical boat lifts that do their job very well. These units can support ski boats, fishing boats, cruisers and pontoon boats. Pictured above with optional loading guides.
The CraftLander aluminum boat lift is easier to crank than most lifts on the market today due to their patented "Positive Drive Winch" that is chain driven with roller bearings. The 3500 lb models have a 11:1 winch (11 turns or the wheel to 1 complete revolution of the drum) and raises about 1 inch every 2 turns of the wheel.
KEY FEATURES
- 3500 lb. Max Lifting Capacity
- 108" and 120" Max Beam (inside width) available and chosen below
- 64" Lift Height
- 10' Vinyl and Aluminum Hull Bunks
- 98% Aluminum
- 16" x 12" Foot Pad with Tapered Edges
- 42" or 48" Aluminum Wheel
- Galvanized or Stainless Steel Cables Available
- 54" Telescoping Legs
- 2 Year Mechanical and 15 Year Structural Limited Warranty
This lift has been designed to be used in low and fluctuating water levels. The 64" lift height gives you a lot of cradle travel to work with and keeps you from having to move the lift to shallow or deeper water.
The 54" telescoping legs get you installed up to a 7 foot water depth. We can also provide longer legs and a bracing kit to get you in up to 10' of water.
The large tapered pads or feet on this unit allow it to be moved across many different surfaces and lake bottoms without snagging or digging in. This is very helpful for seasonal installation and removal.
AVAILABLE ACCESSORIES
Some accessories can be added in the checkout, canopies and motors must be added to the cart from their page. We have provide links below;
- Canopy (can not be added in checkout)
- Power Unit or Motor (can not be added in checkout)
- Loading Guides
- Motor Stop
- Axle Brackets and Rim Plates (wheel for install and removal)
- Stainless Steel Upgrade (makes lift all aluminum and stainless)
ADDITIONAL INFORMATION
- This product ships out common carrier freight. Please contact us for shipping estimate. Shipping available worldwide.
- The 3500 lb models and the 4500 lb models are so similar, the assembly videos for the 4500 lb models can be very helpful with the 3500's also. We have provided a link in the related links below.
|
MODEL
- Brand - CraftLander
- Models # - 35108v & 30120v
OVERALL SIZE
- Overall Width - Outside Foot Pad to Outside Foot Pad
123" for the 35108v
135" for the 35120v
- Slip Width Needed - Outside Upright to Outside Upright
118" for the 35108v
130" for the 35120v
- Overall Length - 120"
FEATURES
- Weight Capacity - 3500 lb
- Beam Capacity - 108" or 120"
- Lift Travel - 64"
- Bunk Type - Full length vinyl and aluminum null bunks
- Bunk Length - 120"
- Supporting Legs - 54" telescoping legs with 42" of adjustment (72" legs are available)
- Color - Aluminum
- Wheel - 42" or 48" Aluminum
- Cradle - Aluminum I-beam
CONSTRUCTION
- Structure - 98% Aluminum (four galvanized steel plates to hold lower cable ends for strength)
- Fasteners - Zinc plated fasteners (stainless upgrade available)
- Cable Size - 5/16"
- Cable Material - All stainless steel cables
- Pulley/Sheave Type - Glass-nylon
- Weight of Unit
430 lbs - 35108v
440 lbs - 35120v
- Winch - 11:1 Positive Drive Winch chain driven with roller bearings
- Stainless Upgrade - Available and makes lift all aluminum and stainless steel
WARRANTY
- 2 Year Mechanical
- 15 Year Limited Warranty
|
INSTALL REQUIREMENTS
- Water Depth Needed - 24" to 72" depending on draft of boat (draft of boat plus 7"). Up to 90" water depth with deep water kit and up to 120" with special order kit
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 9/16" Wrench and Socket
- 2 - 3/4" Wrench and Socket
- 15/16" Deep Well Socket and Ratchet
- Flat head screw driver
- Crescent Wrench
- Tape Measure to square lift
FREQUENTLY ASKED QUESTIONS
For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts.
What if my boat is heavier than the weight classification of the lift?
- Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that your follow the weight ratings. Overloading the boat lift will void any manufactures warranty.
How long will it take me to build a new boat lift?
- As a first time builder it is a good idea to set aside 4-6 hours with the aid of a second person to construct this unit. We have provided links below to a set of instructional videos for the 4500 lb models, showing how the unit goes together. Because the 3500 and 4500 lb models are so similar, you can use these videos to build the 3500's. They are not the best quality, but can shave 2 hours off your build time.
Can the wheel be placed on either side of the lift?
- The wheel and winch can only be installed on one side, the winch post side. The way the cables are ran through the lift only allow the winch to be mounted on the one post.
- If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.
What width lift should I choose for my boat?
- We recommend trying to purchase a lift that is at least 12" wider on the inside than your boat. This give you at least 6" of play on each side of the boat when entering. If you purchase a lift that is a lot wider than your boat, the step out of the boat to the dock can be difficult. If you purchase a lift that is only a few inches wider than your boat, parking can be difficult for some boats and you will never be able to add guides. Sometimes the width of a slip or well may determine the width of lift you choose, in this case you will also want to find the outside width of the lift you are purchasing.
|
|
INSTALL REQUIREMENTS
- Water Depth Needed - 24" to 72" depending on draft of boat (draft of boat plus 7"). Up to 90" water depth with deep water kit and up to 120" with special order kit
- Lake Bottom - Solid or semi-solid (may sink in extremely muddy areas with very deep bottoms)
POWER REQUIREMENTS
- No Power Needed - Manual lift. Power supply needed only if motor is added
SHIPPING REQUIREMENTS
- Ships - LTL Freight banded to pallet
- Delivery Address - Must be accessible by a semi truck and 48' trailer. Business deliveries save on shipping
- Once Off Pallet - Lift can be hauled in bed of pick-up or small trailer fairly easily
REQUIRED TOOLS FOR ASSEMBLY
- 2 - 9/16" Wrench and Socket
- 2 - 3/4" Wrench and Socket
- 15/16" Deep Well Socket and Ratchet
- Flat head screw driver
- Crescent Wrench
- Tape Measure to square lift
FREQUENTLY ASKED QUESTIONS
For questions like 'How to choose the correct lift for my boat?' or 'How to find the weight of your boat?' please reference our learning center FAQ here. The questions below are questions that have been asked by customers about this lift or similar lifts.
What if my boat is heavier than the weight classification of the lift?
- Boat lifts are overloaded during manufacturer testing, However it is strongly recommended that your follow the weight ratings. Overloading the boat lift will void any manufactures warranty.
How long will it take me to build a new boat lift?
- As a first time builder it is a good idea to set aside 4-6 hours with the aid of a second person to construct this unit. We have provided links below to a set of instructional videos for the 4500 lb models, showing how the unit goes together. Because the 3500 and 4500 lb models are so similar, you can use these videos to build the 3500's. They are not the best quality, but can shave 2 hours off your build time.
Can the wheel be placed on either side of the lift?
- The wheel and winch can only be installed on one side, the winch post side. The way the cables are ran through the lift only allow the winch to be mounted on the one post.
- If you need the wheel on a certain side of your dock, simply spin the lift around and adjust the bunks accordingly. There is no front or rear on the lift.
What width lift should I choose for my boat?
- We recommend trying to purchase a lift that is at least 12" wider on the inside than your boat. This give you at least 6" of play on each side of the boat when entering. If you purchase a lift that is a lot wider than your boat, the step out of the boat to the dock can be difficult. If you purchase a lift that is only a few inches wider than your boat, parking can be difficult for some boats and you will never be able to add guides. Sometimes the width of a slip or well may determine the width of lift you choose, in this case you will also want to find the outside width of the lift you are purchasing.
|
